Electric plenum heater
Use existing ductwork
 |
A plenum heater is a forced-air heating device that is installed in the plenum, which is the spot in the ductwork system where ducting and furnace join. Air is heated as it flows across electric elements and then distributed through the existing ductwork. A plenum heater is a low cost way to upgrade your heating system, to turn your fossil fuel furnace into a dual fuel system, and to benefit from off peak rates. Proper plenum space must be available in the heating equipment space. |
Plenum heaters can be installed while remodeling or during new construction.
Applications
- Meeting a home's total heating needs.
- Converting fossil-fuel systems to all-electric heating.
- Adding to a fossil-fuel system to create a dual-fuel heating system.
- Installing with a heat pump to provide supplemental heating for the coldest winter weather.
Benefits
- Provides customer with choice of electric or fossil fuel operation.
- High safety factor.
Features
- Available in both upflow and downflow configurations.
- May be installed with A-coil for air conditioning or heat pump operation.
How a plenum heater works with our electric service rates
You can operate a plenum heater on Otter Tail Power Company's general service rate or install it as part of a qualified off-peak heating system operating on our dual fuel or RDC rates and take advantage of rates that are about 30 percent to 50 percent less than the standard price per kilowatt-hour. Check out our off-peak heating and cooling programs to learn more..
Note: If installed on an off-peak rate you may incur additional costs for a meter socket, and/or wiring.
